concrete release agent

 

I. Overview

WPL-9007 release agent can overcome the bonding force between the formwork and concrete or the cohesion of the surface concrete itself, and it can be applied to the inside of the formwork to lubricate and isolate, effectively promoting the concrete to break away from the formwork smoothly when removing the formwork, and keeping the shape of the concrete intact It is non-destructive and can form a bright mirror effect on the concrete surface. It is currently one of the few advanced products on the market.

 

2. Main features of the product

WPL-9007 release agent is a water-based release agent with the following advantages:

1. Easy to use, directly brush or spray;

2. The demoulding effect is good, the demoulding adsorption force is less than 300Pa, and the edges and corners of the concrete shape are kept intact;

3. It has no pollution to concrete, does not pollute steel bars, does not affect the grip of concrete on steel bars, and has no rust-promoting effect on steel molds;

4. Has good rain erosion resistance and excellent weather resistance;

5. No effect on the later surface decoration;

6. Water-based material, environmental protection, different from ordinary waste engine oil release agent;

7. It can be constructed in the temperature range of -10°C-80°C, and can be used for prefabricated components, steam-cured concrete and large components.

 

3. Application scope

It is suitable for demoulding of cast-in-place concrete construction products of steel formwork, wood formwork, concrete tire formwork, dry formwork or wet formwork. It is especially suitable for demoulding of long-span bridge components and concrete components with complex sections.

 

Fourth, the main performance indicators

project	Index
Viscosity, 20℃	10cps
Specific gravity	1.0
pH value	7-8
Stability	Product without delamination
Corrosive	No corrosion to formwork
Film forming time	5-10 minutes
Dosage	5-10 m2/kg

5. Usage and Precautions

1. This product needs to compete with water 8-12 times, which depends on the complexity of the product.

2. First clean the surface of the formwork base without any impurities, and then spray it with a spray gun or wipe it with a cloth.

Molding agent, coated on the surface of the formwork. After 5-10 minutes, the concrete can be poured after drying and forming a mold. The method is simple and easy to operate.

3. The product can be coated with 5-10m2 formwork per kilogram, two or three molds can be removed continuously after one spraying, and it can also be used according to

The demoulding strength is appropriate to select the demoulding times.

6. Packaging and storage

120kg or 200kg/barrel; the storage period of this product is 1 year.

———————————————————————————————————————

Manufacturer: Huizhou Wangpingliang New Material Co., Ltd.

Address: Dong House, Industrial Zone, Jiaoyuan Road, Shiwan Town, Boluo County

Tel: 0752-6919281 Mobile (WeChat same number): 13823594451

Contact: Xie Sheng