Die casting release agent

1. Performance characteristics: 

WPL-6808 die-casting mold release agent has high-efficiency mold release performance, excellent heat resistance and oxidation resistance, and does not affect secondary processing. It is used for die-casting of aluminum, magnesium, aluminum alloys, and magnesium alloys. It has good thermal stability and does not affect Recoating of workpieces.

1. No carbon deposition performance

There is no carbon deposit or scale on the surface of the mold and casting, and it will not affect the subsequent surface treatment such as electroplating and spraying.

2. Release performance

The die-casting release agent is sprayed on the surface of the mold, and the active ingredients immediately form a dense film. The film is resistant to high pressure and erosion during the injection process, effectively preventing the adhesion of the die-casting product and the mold, and playing a role in release and anti-sticking.

3. Good cooling effect

Using this die-casting mold release agent, the mold temperature can be kept at 160-200°C, the mold will not crack due to the stress caused by cold and heat, and the working cycle will be shortened.

4. Good high temperature resistance and lubricating performance

The die-casting release agent forms a uniform film without accumulation, and the surface of the casting is bright without color spots. Die-casting mold release agent has good adhesion to high-temperature mold surfaces and can operate at mold temperatures as high as 200°C.

5. High safety performance

The die-casting release agent is non-toxic, non-flammable, non-corrosive, and has no chemical reaction. It will not produce harmful smoke or odor during use, and the working environment is clean.

6. No-cleaning performance

There is basically no residue on the surface of the mold, easy to clean and maintain, and the surface of the product is smooth and easy to clean.

 2. Technical indicators:

1. Appearance: milky white

2. PH value: 7-7.5

3. Active ingredients: synthetic polymers, active agents

 3. Usage and dosage:

1. The die-casting release agent must be diluted with pure water, the dilution ratio is 1:100-1:120 times, and it can be used by shaking or stirring evenly; the dilution ratio can be adjusted according to the complexity of the casting and the depth of the mold.

2. Please use deionized water to dilute as much as possible, which will help prolong the life of the working fluid, reduce the amount of concentrated liquid used, and fully reflect the performance of the processing fluid.

3. The optimum temperature for mold use is 160°C-200°C.

4. Unless permitted by the technical service department, no other substances shall be added to the concentrate and diluent.　

 4. Storage and transportation:

1. The shelf life of this product is 6 months when it is sealed and stored at room temperature, and it is packed in a 50kg polyethylene plastic drum or a 200kg iron drum.

2. The die-casting release agent should be stored at room temperature, and should be protected from freezing and sun protection. After opening, it should be sealed and kept in a safe place.

3. Store and transport as non-dangerous goods.

———————————————————————————————————————

Manufacturer: Huizhou Wangpingliang New Material Co., Ltd.

Address: Dong House, Industrial Zone, Jiaoyuan Road, Shiwan Town, Boluo County

Tel: 0752-6919281 Mobile (WeChat same number): 13823594451

Contact: Xie Sheng